- ❤【Good Performance】: this state of the art device will allow you to test the water resistance of your watches up to 6 atmospheres.By exerting pressure to sealed cylinder, underwater status of tens of meters can be simulated.
- ❤【Test Mechanism】: this watch waterproof tester is used for testing the water resistance of watch cases. Its transparent cylinder will allow you to easily observe which part of the watch is not waterproof. Once you have found the break in the seal of the watch, you can simply take the watch out and correct the seal.
- ❤【Principle】: By pressurizing the sealed can, you can simulate the condition of the product to tens of meters under water. The pressure difference between the inside and the outside of the product is created after the pressure relief of the sealed box. Air bubbles are visible in the leaking product.
- ❤【Easy To Use】: If the pressure drops, check for bubbles in the watch. If there are bubbles present, the watch is not properly sealed. Pull the rod quickly and take out the watch. There is no air bubble, the seal of the watch is very good.
- ❤【Wide Application】: this watch pressure tester highly efficiently tests the water resistance of your watches with the Solid Waterproof Tester for Watches in your home or at your business.
Specification: Product name: Watch waterproof tester Air pressure test range: 0.1-6.0kg (about 0.6Mpa) Product test diameter: 65mm Product test height: 72mm Cylinder pressure: 10Kg (about 1Mpa) Cylinder outer diameter: 80mm Cylinder inner diameter: 65mm Cylinder height: 138mm Packaging size: 290mm180mm=350mm Net weight: 3.3kg packing list: Waterproof tester*1 Instructions for use 1. Pull the watch stem out as far as possible 2. Loosen the two screws and take out the cover 3. Bring people's water to the designated bucket red line; 4 Hang the watch on the hanging rod 5 Install the upper cover and tighten the screws; 6. Shake the pressure lever to allow the air pressure to reach 3 air pressures (the official standard of the Swiss watch industry. Wait three minutes to allow air to enter the entire watch. 7. Press the watch stem to immerse the watch in water, and press the exhaust button to expel the air. 8. When the pressure drops, observe whether there are bubbles on the watch. If there are bubbles, the watch is not tightly sealed. Quickly pull the hanging lever to remove the watch. No bubbles appear and the watch is well sealed.
